5010B colorless polyether amine modified curing agent imports

5010B colorless polyether amine modified curing agent imports. To room temperature curing epoxy resin. After curing the product with: colorless, transparent, high hardness, high toughness, not brittle, can be used for crafts, signs, and special requirements of the potting occasions, high and low temperature impact (-35 ℃ ~ 120 ℃).
Typical properties:
Model 5010B
Appearance Colorless transparent liquid
Viscosity MPa · s / 25 ℃ 9 ~ 13
Density 25 ℃ g/cm3 0.92 ~ 0.98
Active hydrogen equivalent of 65
Film drying time (25 ℃) 4 小時
① recommended ratio of epoxy resin 618:5010 B = 3:1
Applicable period Min/25 ℃ <60
Curing rate hours / 25 ℃, 100 gram 10
Cure Hardness Shore-D ≥ 70
Characteristics: toughness after curing \ low viscosity \ curing high mechanical properties, resistance to high and low temperature impact (-35 ℃ ~ 120 ℃)

Application:
5010B with the liquid epoxy resin with, for crafts, signs of the colorless, transparent use.
Packaging:
5KG / plastic drum or 195KG / drum
Note:
Curing agent on the skin and eyes 5010B moderate stimulation, if contact with skin, wash with soap, if contact with eyes, immediately wash with water and seek medical advice.
Other:
This information is for reference only, customers should be in accordance with their respective applications in advance of trial to determine its applicability, the case of product application questions, please feel free to contact